1 1/2" Discharge Hose - Urethane Cover EPDM Tube 300 PSI - Purchase by the foot
Our 1 1/2” black discharge hose is made for many applications. It has a urethane cover for great durability and stretch strength. If you need a discharge hose that is made to be dragged and can handle higher pressure applications this is a great option. Rated for 300 working PSI with a 900 burst PSI. Don’t let this work horse fool you into thinking it is bulky and hard to move. It has great flexibility and only weighs .195 lbs per foot. Purchase it by the foot to ensure you get the exact amount of lay flat hose that you need. Easily rolls for winter storage. Temperature rated from -40 F to 212 F allowing you to use it in cold and hot applications. Great as a drag line hose, discharge hose and frac hose. Comes with our Factory Direct Hose satisfaction guarantee!
| Hose inner diameter | 1.5 inch* |
| Wall Thickness | 0.069 inch |
| Pressure | 300 working psi (figured at 78 deg F.) |
| Burst Pressure | 900 |
| Tensile Strength | 13,860 lbs |
| Weight | Approx. 0.195 per foot* |
| Temperature Range | -40 F to +212 degrees F |
| Color | Black |
| Tube Material | EPDM Rubber |
| Cover | Polyurethane |
| Reinforcement | 2 Ply High Tensile Strength Polyester Spirals |
| Applications | Water Discharge, Light Water Based Chemicals, Chlorine, Alkalizes, Brine, Glycols, Agricultural, Drag-line Hose, Linear System Hose, Fracking Hose |
*hose dimensions & weights can vary slightly
**please note - returns on cut lengths of 1 1/2 inch rubber layflat hose under 25 ft are not accepted. Returns on cut lengths over 25 ft are subject to a 20% restocking fee
Warning! Ends attached with bands, clamps or sleeves that are rated under 300 psi will lower the overall psi rating of the hose assembly. The psi rating will match the lowest psi rating of the band, clamp, sleeve or fitting used in the discharge hose assembly.
